The Garment accessories Mini Air Cooler utilizes the principle of evaporative cooling, so it has the dual functions of cooling and humidifying (relative temperature can reach about 75%). It can be used in textile, knitting and other workshops to improve the cooling and warming conditions, and also to purify the air and reduce the needle. The needle breakage rate during the spinning process improves the quality of the needle textile product.
Height Of Wind Outlet:30cm
Accessories:2 Ice Crystal
Control:remote controller or mechanical
1. Garment accessories Mini Air Cooler uses new materials, is solid and durable, and is not easy to age. Each blade is balanced to ensure product stability and durability.
2. There is a safety wire at the air outlet to prevent the occurrence of safety hazards.
3. It can adjust the blade manually to adjust the air supply angle.
4. It ventilates, ventilates, dusts, deodorizes and cools down, increasing the oxygen content of the air and improving work efficiency.
1. Various routine inspections are planned in a planned manner based on equipment operation and customer needs;
2. To ensure a more stable performance of the evaporative cooling unit, please use this mini air cooler under the following conditions:
(1) Ambient temperature: 18 ° C - 45 ° C
(2) Relative humidity of the environment: ≤85%;
(3) Atmospheric pressure: 86Kpa-106Kpa;
(4) The water supply needs to be softened, the water supply temperature is ≤ 45 ° C, and the water supply pressure is 0.15-0.6 Mpa;
(5) The voltage deviation does not exceed ±10% of the rated voltage;
(6) The ambient air quality of the use shall meet the standards of GB 3096 (above 3);
(7) Non-corrosive environment.